The Canon printer error code 5200 is related to the amount of ink and usage of it. The Canon printers is designed to blend the remaining colors of ink for making black color. The error code 5200 indicates the cartridge is either empty, low, or damaged. Although, there is nothing to worry but still fixing the error without any guidance to troubleshoot the issue. This is why users encounter with the issue of Canon printer error 5200. When you know about the cause of the issue then you can smoothly troubleshoot the issue.
top of page
bottom of page
Before moving on to steps to resolve the Canon 5200 Printer error code, you should know about the reason behind 5200 Canon Printer error code. Potentially this error happens due to low ink levels. Your Canon Printer has a program that works towards combining all the left ink to make it print black. This often leads the ink cartridges to become empty, which further leads to the occurrence of Canon Printer error 5200 code. Often, the malfunctioning of the Canon Printer may also lead to the Canon error 5200.
When Canon error code 5200 occurs, you cannot print further. Hence, it is necessary to identify the reason behind the error and troubleshoot it. If you are facing the Canon Printer code 5200, and are looking for effective ways to resolve the issue, follow the various methods listed below and get started with your printer again:
1st Method: Resetting the Canon Printer
Here, you need to perform a printer reset by following the steps mentioned below:
Switch off your printer to start resolving the code 5200 Canon Printer.
Press and hold the stop button on the printer.
Press and hold the Power on button.
While you hold on the Power button, release the stop/reset button on the printer.
Press the stop/reset button twice while holding the Power button.
Wait until the printer displays an “idle message”.
Once you see the “idle” message, open the top cover of the printer to expose the ink cartridges.
Lift the cartridge cover holder and remove the Black and Color cartridges from the printer.
Place the cartridge holder back to its original position.
Replace the top cover of the printer to its initial position and switch on the printer.
Once the printer initializes, replace the cartridges to their position.
Check whether the 5200 error on Canon Printer has been resolved or not.